Baldor Electric
Company

Baldor AC Motors

Premium Efficiency

Super-E Motors are designed to conserve energy over extended time periods. These premium efficiency designs are available in both Totally Enclosed Fan Cooled and Open Drip Proof construction. All three phase motors are Inverter Ready per NEMA Standard MG1, Part 31.4.4.2. This means the motors in 230 and 460 volts meet NEMA's corona inception voltage requirements, under this Standard, and can withstand peak voltages of up to 1600 volts. Motors having premium efficiency are also available in single phase designs.

Automotive

Automotive approved motors are available in both Standard High Efficiency, our Standard-E, and Premium Efficiency, our Super-E, designs. The Standard High Efficiency motors meet efficiency times power factor requirements of GM7EQ. The Premium Efficiency motors meet the efficiency times power factor of GM7EHQ. Available from stock in ratings from 1 HP to 100 HP. These cast iron motors meet automotive requirements for sound power levels.

Brake Motors

Baldor's line of brake motors are available in totally enclosed fan cooled, open drip proof, or explosion proof designs, in either single or three phase. Stock ratings are available from .25 horsepower through 30 horsepower. These motors use a mechanical spring set brake with a manual release. Brake motors may be used on machine tools, conveyors, door operators, speed reducers, hoists, or any application requiring quick stops and positive holds.

Commercial Motors

Baldor's new Definite Purpose Commercial Motor line offers many new ratings designed for applications with low to medium starting torque requirements. The Baldor Commercial Duty Motor line brings Baldor's reputation for high quality designs to commercial applications with a cost-effective offering. This definite purpose product line is designed for certain applications requiring NEMA 48 and 56 motors rated between 1/4 and 1 HP, in both single and three phase ratings. Typical applications include: Jet Pump, Heating and Cooling, Ventilation, Air Conditioning, Blowers, Direct Drive Fans, Condenser Fans, and Pedestal Fans.

Explosion Proof

Baldor's Explosion-proof motors are ideal for a wide variety of applications where hazardous fumes or dust may be present. The motors are available in three phase and single phase with ratings, in stock, from 1/4 HP through 300 HP. Designs available include standard foot mounted, C face with base and C face less base, 60 Hz and 50 Hz, Jet Pump motors, and Inverter Drive motors.

F-2 Mounting

Motors built for applications requiring F-2 mounting are available from stock in 1/2 HP through 60 HP. These motors are manufactured in both TEFC and Open Drip Proof construction in NEMA frames from 56 to and including 364T. Many of the ratings are Class "F" insulated with 1.15 Service Factor that operate within Class "B" temperature limits. The motors are stocked in both Standard High Efficiency and Premium Efficiency designs.

Farm Duty

These motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers. General purpose motors are also available in both single and three phase, TEFC and ODP construction. For those loads that are hard to start and require extra torque, Baldor is the only motor manufacturer that stocks Repulsion-Start Induction Run motors, in sizes from 2 HP to 10 HP.

General Purpose

Baldor's extensive line of General Purpose motors are available in Open Drip-proof and TEFC construction in both single and three phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP. Designed for "general purpose" use means that these motors can be used in applications which include compressors, pumps, fans, conveyors, material handling, machine tools and many others. Also available are stock motors that are direct replacements for the motors built in Pre-1952 NEMA frames.

Severe Duty

Severe Duty motors are available from 1 HP to 500 HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions. A few typical applications which might require these types of motors include petro-chemical plants, mines, foundries, pulp and paper plants, waste management facilities, rock crushers, and chemical plants.

HVAC

Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation. The motors range in size from 1/4 HP to 75 HP and include heavy duty industrial designs as well as designs for commercial applications. These applications include ventilators, direct drive and belted fans, exhaust fans, unit heaters, air conditioning units, and commercial refrigeration condensers. Also included are motors designed especially for use with variable torque electronic controls that are used to conserve electricity.

Inverter Duty

Inverter Drive Motors are wound with 200 degree C. moisture resistant ISR (Inverter Spike Resistant) magnet wire which dramatically extends the life of the motors compared to motors wound with non-ISR wire. The motors available from stock range in size from 1/3 HP to 500 HP. These motors are designed for applications where up to a 1000:1 constant torque speed range is required. Applications include conveyors, pumps, fans, metal processing, compressors, test stands, and material handling equipment.

Metric

Baldor's line of Metric Dimension Motors are designed in IEC Frames from D63 through D200L. The motors are available from stock in 50 Hz or 60 Hz. This means that replacement 60 Hz motors are readily available from Baldor to replace metric motors that have failed on imported machinery. Motor construction meets IP54 and includes motors with B3 base mounting, B5 Flange mounting, or B14 Face mounting. Stock motors range in size from .18 kW to 30 kW. Typical applications for this product include pumps, fans, conveyors, machine tools, gear reducers and any other jobs that requires IEC Frames.

Pressure Washer

These single phase motors are available in both totally enclosed fan cooled and open drip proof construction. Industrial quality with 200 degree C., moisture resistant wire, the motors have UL and CSA recognized component approvals. NEMA frame sizes include 56 through 184 in rigid base only or NEMA C face with base.

Pump

Our pump line of motors includes single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-Base vertical solid shaft pump motors. The motors are stocked in totally enclosed fan cooled, open drip proof, and many explosion proof ratings. Applications for these run the gamut from swimming pool pumps to medium and high thrust in-line pumps used in water treatment plants. Horse powers range in size from 1/3 through 75 HP.

Servo

Baldor's servo line includes both brushless and brush type motors. Designs are available having either ferrite or rare earth magnets. Numerous ratings are stocked and are available with Baldor controls for Matched Performance. These motors are ideal for industrial applications where high torque to inertia ratio and repeatability are needed. These applications include material handling, X-Y positioning, machine tools, factory automation, and packaging equipment.

Two-Speed

Two Speed Motors are available in both totally enclosed fan cooled and open drip proof designs. Constant torque or variable torque motors having one winding or two winding are stocked in NEMA frames 56 through 284T. Applications for these motors include fans, blowers, pumps, machine tools, hoists and conveyors.

Vector

Vector Drive Motors are stocked in either totally enclosed blower cooled with an attached constant velocity fan or totally enclosed non-ventilated construction. All motors are supplied with a 1024 line count encoder. Horse powers are available from 1 through 500 HP in NEMA frame sizes from 56C through 5009L. The motors are ideal in industrial applications where full torque is needed from base speed down to zero speed. Applications include test stands, material handling, packaging equipment, printing presses, and others requiring exact speeds and positioning.

Washdown

Baldor's Washdown Duty Motors are available from stock in single and three phase AC and in DC designs. Horsepowers range from 1/2 to 20. Designs include motors having an electostatically applied epoxy finish, paint free with major components in 300 series stainless steel, and all stainless steel. Applications include food processing, packaging, pharmaceuticals, or applications where motors are regularly exposed to high pressure wash down.

Baldor AC Controls

VS1SP Inverter Drive

The VS1SP AC Drive uses a traditional inverter V/Hz control method. Its easy setup, quick startup, and right-out-of-the-box operation make it among the most popular variable speed motor controls. It is ideal for applications where multiple motors are operated simultaneously from one motor control, including pumps, fans, and general machinery applications.

VS1SP Washdown Inverter Drive

The VS1SP AC Drive uses a traditional inverter V/Hz control method. Its easy setup, quick startup, and right-out-of-the-box operation make it among the most popular variable speed motor controls. It is ideal for applications where multiple motors are operated simultaneously from one motor control, including pumps, fans, and general machinery applications.

VS1GV Vector Drive

The VS1GV is a high performance vector drive that offers three modes of control - closed-loop, encoderless or the traditional V/Hz method - to control motor speed and torque with precision and the responsiveness needed to accomplish the most demanding applications.

VS1GV Washdown Vector Drive

The VS1GV is a high performance vector drive that offers three modes of control - closed-loop, encoderless or the traditional V/Hz method - to control motor speed and torque with precision and the responsiveness needed to accomplish the most demanding applications.

VS1PF Pump and Fan Drive

The Baldor V*S Drives VS1PF is a feature rich AC drive targeted at the pump and fan markets but with functionality that rivals more sophisticated general purpose products. The VS1PF provides ability to gain traditional energy savings achieved by controlling centrifugal loads with a variable frequency drive while implementing unique algorithms that further reduce energy consumed by your application.

VS1MD Microdrive

With an extended capability up to 10HP (7.5) kW, the VS1MD microdrive is among the most powerful and cost competitive in its class. Its compact size, user-friendly interface, higher horsepower, and superior motor torque make it ideal for a wide variety of applications.

VS1MX Microdrive

Considered the ultimate drive for harsh environments, the Baldor VS1MX microdrive completes our family of reliable AC microdrive products. This easy-to-use, low-power AC variable speed drive has a compact design and is available in switched or non-switched enclosures. Its IP-55/NEMA 12 rating makes it ideal for use in wet, dry and harsh-duty conditions.

VS1SM Microdrive

The Baldor VS1SM is a V / Hz and Sensorless Vector product that combines performance an reliability. With optional built-in EMC/RFI Filter and configurable PNP/NPN Digital Inputs, this single phase 230V AC microdrive is ideal for OEM Applications that require a compact, cost-effective, feature-rich product.

H2 Inverter Drive

Baldor's new H2 Inverter drive offers open loop speed control in one easy to use package: V/Hz mode for multiple motors or Encoderless Vector for higher performance all in one package. V/Hz mode allow out of the box setup and operation. Used for a variety of applications that require adjustable speed operation and good speed regulation including pumps, fans and general machinery applications. V/Hz is the control method of choice for applications where multiple motors are operated simultaneously from one motor control.

H2 Washdown Inverter Drive

Baldor's new H2 Washdown Inverter drive offers open loop speed control in one easy to use NEMA 4x/IP65 package: V/Hz mode for multiple motors or Encoderless Vector for higher performance all in one package. The Easy to Use keypad is integrated into the cover in order to prevent “voids” whereby food or other contaminants can collect. V/Hz mode allow out of the box setup and operation. Used for a variety of applications that require adjustable speed operation and good speed regulation including pumps, fans and general machinery applications. V/Hz is the control method of choice for applications where multiple motors are operated simultaneously from one motor control.

H2 Vector Drive

Baldor's new line of H2 Vector Drives provides the ultimate control of AC induction motors. Using a motor mounted encoder, or similar feedback sensor, the control is able to precisely control motor torque and speed. Full torque at zero speed, ability to directly command motor torque, tight speed regulation and high-speed motor operation are all available. Setup is easily accomplished using the one touch rotational or stationary autotune feature. But the control doesn’t stop there, adaptive tuning will also automatically adjust the control loop while the motor is running.

H2 Servo Drive

Baldor's new line of H2 Servo Drives provides control of 3-phase AC induction servomotor in an industrial package and design. These NEMA 1 controls offer Baldor’s easy to use Smart Keypad for easy setup and flexibility. The H2 keypad follows the same easy to use menu structure as that of its companions, the H2 Inverter and H2 Vector drives.

H Inverter

Adjustable speed Inverter controls for AC Induction motors are available in a variety of ratings, input voltages, and enclosure styles. Whether you are automating equipment or preparing to save energy on fans and pumps Baldor has an easy to use motor control for all your needs. From small mini inverters to floor mounted cabinets Baldor has stock ratings from 1/3 to 450 HP. All units are UL and CUL listed and many are standard with ready to mount NEMA 1 enclosures and easy to use Operator Keypads.

H Washdown

Baldor Washdown Duty adjustable speed motors and motor controls are designed for applications where the equipment is subjected to brutal high-pressure washdown or exposed to elements of inclement weather. Inverter and Vector controls are available in NEMA 4X enclosures from 1 through 20 HP. All Washdown Duty controls are UL and CUL Listed. Inverter and Vector Duty motors are available in Paint Free and Epoxy Coated finishes from 1 through 10 HP. All Washdown Duty Inverter and Vector Drive Motors are UL Recognized and meet NEMA MG1, Part 31.

H Vector

High performance Vector controls for AC Induction motors are available in a variety of ratings, and input voltages. Using Flux Vector control techniques and closed loop motor feedback the Baldor Vector control makes automating industrial equipment easy with the built in motor auto-tuning feature. Baldor stocks ratings from 1 to 450 HP and has custom capabilities in larger horsepower sizes. All units are UL and CUL listed and come standard with ready to mount NEMA 1 enclosures and easy to use Operator Keypads. Expansion capabilities for various I/O and Bus Communications protocols are available with field installable expansion boards.

Vector Line Regen

High performance Line Regen Vector controls for AC Induction motors are available in a variety of ratings, input voltages, and enclosure styles. Using Flux Vector control techniques and closed loop motor feedback the Baldor Line Regen Vector control adds even more capability in slowing a motor and saving energy at the same time. No dynamic braking resistors are needed to bleed energy from the motor control. Near unity power factor and ability to meet IEEE-519 (1992) is easy with the built in sine wave input/output converter section. Baldor stocks ratings from 10 to 50 HP and has custom capabilities in larger horsepower sizes. All units are UL and CUL listed and come standard with ready to mount NEMA 1 enclosures and easy to use Operator Keypads.

Series 5 Micro Inverters

Baldor's Series 5 inverter is a low cost and compact size inverter. However, don’t let the compact size fool you, the Series 5 mini-inverter is packed with the same protection features you would find in larger controls. Built-in current limit provides motor overload protection. High peak-current is available for up to 2 minutes and delivers up to 200% starting torque. The available peak currents will result in reduced nuisance tripping during overload conditions. Electronic inrush current limit and filtering is standard to reduce transient voltage spikes from dirty power sources.

Analog Soft-Start & Dynamic Brakes

Baldor's full line of Soft Start motor controls for AC induction motors include products from simple Torque Control designs to the easy to program Digital controls. Units are available to reduce mechanical stress, prolong motor life and lower motor inrush currents in both single and three phase designs. Combination, Non-Combination and control only configurations in panel or NEMA 1, 3R, 12, or NEMA 4 enclosures are available from 1 through 800 HP. Many are available from stock or can be quick shipped in 72 hours or less. UL and CUL Listing along with CE Certification are standard on most designs.

Digital Soft-Start

Baldor's Digital Soft-Start control combines the simplicity of a 6 SCR three phase voltage regulator with the most adaptable soft staring techniques available. Soft Starting reduces the wear on mechanical gears, chains, sprockets, belts and gearboxes. It also reduces water hammer in pumping applications. The reduced inrush current can prevent peak overload of the overall plant, thus preventing peak demand penalties charged by the local utility company.

Baldor SmartMotor

This breakthrough drive product combines adjustable speed control electronics with a Premium Efficiency industrial motor in one easy to install, easy to use package. The Baldor SmartMotor is available in 1 through 10 HP covering NEMA frames from 56C to 215TC for standard and Washdown Duty designs. Close Coupled Pump units in NEMA 143JM to 215JM frames are also available. UL / CUL Listing and C-Face with rigid mounting base is standard and all models are available from stock.

Baldor DC Motors

General Purpose

These NEMA frame DC motors include permanent magnet designs through 5 HP and wound field designs through 500 HP designed for adjustable speed operation from SCR controls. Applications include conveyors, extruders, winders, printing presses and metering pumps. Most designs are constructed so a tachometer may be added for closed loop applications. Permanent magnet and wound field designs for 90 or 180 VDC have a 20:1 constant torque speed range.

Washdown

Permanent magnet DC motors are available with a choice for standard painted or paint-free finishes. PMDC motors may be used for adjustable speed applications such as conveyors or packing equipment. They may be paired with our BCWD140 Washdown DC SCR control.

Explosion Proof

Permanent Magnet DC Motors are available for 1/4 - 2 HP and wound field motors of 1/2 - 3 HP for Class I, Group D and Class II, Group F & G locations with listing by both UL and CSA. Applications include conveyors and mixers in hazardous locations.

Metric Frames

Permanent Magnet DC Motors are available with a choice of IEC B5 flanges in .2 to 5 HP or B14 C-faces in .2 to 2 HP. All are designed for 180 volt input power with a 20:1 constant torque speed range. These metric frames are designed for replacement on equipment requiring an IEC interface with the gearbox.

Power Motors

Baldor Power Motors are designed for fixed-speed operation from a generator or battery power supply. These are 20% compound-wound motors. Applications include cranes, hoists, conveyors and augers where only DC power is available.

Integral Tachometer

Baldor has designed a Permanent Magnet DC Motor with an integral 50 VDC per 1000 RPM precision tachometer. Its compact design fits into many locations where a conventional motor won’t fit. Plus it is less costly than buying the motor, tach kit and tachometer. Applications include precision metering pumps and tensioning.

Lifitng Magnet Generator

Baldor Lifting Magnet Generators provide power for lifting electro-magnets used in scrap and bulk metal handling facilities. Horizontal motors may be belted from the diesel engine or the motors with C-faces may be coupled to the PTO drive of the crane.

Baldor DC Controls

One Way

One-way DC controls are designed to operate permanent magnet or wound field motors. If the motor's rotation needs to be changed, the armature leads need to be reversed. Some NEMA 1 and NEMA 4X controls offer optional switched for reversal. Stopping of a motor with a one-way control should be done by dynamic braking, some controls offer the Forward-Brake-Reverse switch for this purpose too.

Regenerative

Regen controls are designed to easily operate the motor in forward and reverse directions without motor lead reversal. A separate set of SCRs is used for each direction. With a regen control, stopping is controlled by using the motor's regenerated voltage

Baldor Gear Products

AC Gear Motors

Baldor AC Gearmotors are available in a wide variety of torques ranging from 15 to 627 in-lbs in both right angle and parallel shaft designs with industry standard mounting configurations. The Right Angle single reduction units feature an Internal Expansion Bladder and Mobil® SHC634 Synthetic oil for long maintenance free operation. The Internal Expansion Bladder keeps the lubrication free of contaminates by eliminating the need to vent the gearbox and allows all position mounting. This feature is exclusive to Baldor.

Servo Rated Gearheads

Baldor's low backlash GBSM-series of gearheads mount easily and directly onto the BSM C-series and N-series servo motors. These gearheads are designed for servo applications requiring precision, durability, and long trouble-free operation. The GBSM-series are planetary gearheads, which provide very high power transmission capability, torque multiplication, speed reduction and inertial matching. These are high efficiency gearheads. The standard GBSM gearheads are available in five different case sizes, which fit directly onto the five sizes of Baldor’s BSM servo motors. Mounting takes less than 2 minutes.

Baldor DC Gear Motors

Baldor DC Gearmotors are available in 90 & 180 volts in both right angle and parallel shaft designs with industry standard mounting configurations. The Right Angle single reduction units feature an Internal Expansion Bladder and Mobil® SHC634 Synthetic oil for long maintenance free operation. The Internal Expansion Bladder keeps the lubrication free of contaminates by eliminating the need to vent the gearbox and allows all position mounting. This feature is exclusive to Baldor.

Baldor Speed Reducers

Baldor Speed Reducers are available with ratings up to 25 HP. Our Right Angle Speed Reducers feature heavy-duty cast iron construction, chill cast bronze gears, precision ground worms. All units are pre-lubricated for life with Klubersynth UH1-6-460 food grade (H1) oil. 900 Series speed reducers are dimensionally interchangeable with many other worm gear speed reducers. Baldor also offers our 1000 Series in-line heavy-duty helical gear drives. Models include double & triple reduction units in foot or flange mounted arrangements. Available in ratios from 1.5:1 to 250:1 and are also pre-lubricated with Klubersynth UH1-6-460 oil. All Baldor Speed Reducers are available from stock at any one of our 35 North American warehouses.

Baldor Motion Control Solutions

Baldor provides a wide range of motion control solutions for the automation industry by offering a choice of easy to use programmable motion controllers (positioners) with multi-tasking capability and drives (amplifiers) to suit many applications - the NextMove family is available in PCI format or standalone; the FlexDrive family covers a wide power range; and Ethernet Powerlink (e100 series) provides designers with real-time solutions. Offering between 1 and 12 axes of control, Baldor motion controllers are available with digital and analog I/O for complete machine control. The CAN bus interface can be used to expand the I/O configuration.

Motion control systems can be up and running quickly thanks to Baldor’s Mint programming language. Mint is a versatile, yet easy to use, Basic like programming language. A wide range of programmable moves are supported including trapezoidal, S-ramp, linear and circular interpolation, helical interpolation, electronic CAM, gearbox and flying shear. User defined profiles can be added using the supplied embedded ‘C’ libraries. Mint also supports full control of the I/O and communications back to a host controller. Machine level networking and optional operator panel control can all be controlled under a single Mint application program.

Our latest generation NextMove controllers and intelligent drive, MintDrive, all support multi-tasking Mint, with the ability to write complex programs easily. The number of tasks is limited only by available memory.

A complete set of ActiveX components are supplied with the controllers, allow full motion and I/O sequencing to be performed on a host PC. Application programs can be written in popular programming languages such as Visual Basic™, Delphi and LabView.

The motion controllers are complemented by a complete range of servo drives.

Baldor Motion Control Products

NextMove e100

The NextMove e100 builds on the proven NextMove controller family of products and now integrates management of real-time Ethernet networks using the industry standard protocol ETHERNET Powerlink. Drives, I/O devices, sensors, absolute encoders can be added to the Powerlink network and controlled from the Mint programming language. This greatly simplifies system design and installation, and simultaneously expands the capabilities of the NextMove e100 as a machine control platform.

NextMove ESB

With it's high speed DSP (Digital Signal Processor) core, NextMove ESB provides a cost effect solution for up to 3 axes of servo and 4 axes of stepper control. The onboard I/O can be expanded through the CANbus port. NextMove ESB is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components. It’s USB port provides a fast connection back to the PC. The RS232 port or optional RS485 can be used to interface to other equipment.

NextMove PCI-2

NextMove PCI-2 is the latest generation PCI based motion controller from Baldor. Based around the popular NextMove PCI controller, NextMove PCI-2 offers a pin compatible motion controller with over twice the performance. NextMove PCI-2 is a compact (7") PCI based controller for the control of up to 12 axes of motion. A single card can control up to 4 axes of servo and 4 axes of stepper. Expansion cards are available to take this to 12 axes of servo and 12 axes of stepper.

NextMove ES

NextMove ES is a cost effective rack mounted motion controller for the control of up to 6 axes (2 servo and 4 stepper). Available with a USB interface, this provides a high speed interface to the PC. The onboard CAN port can be used to interface to I/O and HMI devices, as well as peer-to-peer networking capabilities with other Mint controllers. NextMove ES is programmable in multi-tasking MintMT, embedded ‘C’ or through the supplied ActiveX components.

Baldor Servo Motors

Baldor has a wide selection of high performance AC brushless servo motors, DC servo motors and stainless steel servo motors for the motion control industry. Baldor has been leading the way in energy efficient industrial motors since the 1920's – has been supplying the industry with adjustable speed controls since 1952, and has been supplying servo and motion control since 1983.

Since the beginning, Baldor has been supplying reliable servo motor solutions to worldwide applications. Baldor has the design team, experience, application support, test facilities, information, and the solution for your application needs.

Baldor goes beyond the industry standard with innovations to provide reliable performance, while exceeding customer expectations. Some examples of Baldor firsts:

• Stocking of servomotors for with immediate delivery - Baldor's commitment to provide you with service;
• Extra high insulated stator design for protection – Baldor's commitment to provide you with a quality product;
• Superior bearings with improved Exxon PolyrexEM® polyurea grease to provide 4 times greater life – Baldor's commitment to you to provide a reliable product;
• Premium high temperature 200°C moisture resistance, multi-coated copper wire for ability to cope with large current spikes – Baldor's commitment to provide you with a superior product;

You have choices, whether that means a product from stock, or a specific custom design for your application – Baldor believes in providing you with choices and is always ready to tackle the most challenging application.

Baldor AC Servo Motors

BSM N-Series

The BSM N-series provide applications with low inertia to attain the highest acceleration capability – to position faster – to obtain the highest machine throughput. Baldor's motors are hard at work, increasing productivity, improving part quality, providing precision and reducing cost in many applications. This series provides continuous stall torques ranging from 4 Lb-In (0.4 N-m) to 354 Lb-In (40 N-m). Peak torques are typically 4 times continuous. This series has the lowest inertia to provide the maximum torque per package size.

BSM C-Series

The BSM C-series has as standard, a "higher" inertia – thus providing an excellent match for equipment requiring "higher" inertial matching for the machine. This series provides continuous stall capability ranging from 10 Lb-In (1.2 N-m) to 256 Lb-In (30 N-m). Peak torques are typically three time continuous. Baldor's BSM C-series provides 50% more torque in a smaller size (2 inches/50 mm) shorter) compared to previous Baldor motors. The C-Series provides an economical package best used in applications with higher load inertias.

Baldor Servo Rated Gearheads

Baldor's low backlash GBSM-series of gearheads mount easily and directly onto the BSM C-series and N-series servo motors. These gearheads are designed for servo applications requiring precision, durability, and long trouble-free operation. The GBSM-series are planetary gearheads, which provide very high power transmission capability, torque multiplication, speed reduction and inertial matching. These are high efficiency gearheads. The standard GBSM gearheads are available in five different case sizes, which fit directly onto the five sizes of Baldor’s BSM servo motors. Mounting takes less than 2 minutes.

Baldor Stainless Steel Brushless Servo Motors

Baldor's totally stainless steel SSBSM series of servo motors are designed for food, liquid, pharmaceutical, washdown, and high hygiene applications. They may be applied in harsh, corrosive environments. These motors are designed to handle IP67 and withstand 1500 psi washdown conditions. These stainless steel servo motors are offered in standard and low inertia designs for best machine inertial matching. Included in this quality design are lazer etched nameplate, FDA shaft seal, environmental protected stator with premium moisture resistant wire, and internal thermal over temperature protection. Baldor’s SSBSM products are designed to be durable.

Baldor DC Brushless Motors

Baldor's BSM25 and BSM33 brushless DC motors with Hall sensors provide machine designers the benefits of brushless technology – quieter operation, smaller size, maintenance-free, longer life, and faster time to speed. They represent the best long-term investment.

Baldor DC Servo Motors

Baldor's DC Servo motors were designed rugged to meet demanding requirements of industrial motion control. Available in diameters from 2.2 to 4 inches (55.8 to 101.6 mm) to provide continuous stall torques up to 56 Lb-In (6.3 N-m). They are designed to handle a continuous high temperature of 155°C for reliability and dependability. A wide variety of options are available for customization to meet your application needs - tachometers, encoders, brakes, mountings, shafts, windings, speeds, connectors, environmental. Standards available from stock.

Baldor Stepper / Driver

Baldor's DSM series is an integrated high torque stepper motor and microstepping driver. The DSM is available in three frame sizes NEMA 17, 23, and 34, providing open loop operation with torques up to 1061 oz-in (749N-cm). The 1.8° stepper motor is combined with a microstepping drive, with up to 14 resolution setting from 400 steps to 51,200 steps per revolution. A simple Windows™ front end is used to set up resolution and other parameters.

Baldor Servo Controls

Baldor has shipped thousands and thousands of AC and DC servo motors, drives, and controls to many diverse applications throughout the world. It all began in 1952 when Baldor shipped its first reliable adjustable speed control, and in 1983 Baldor began shipping easy to use servo controls and that tradition continues today.

Baldor's philosophy is to make control set up very fast, and easy, and quick to implement. This is accomplished by either a simple keypad, or through set-up wizards and your PC.

Baldor products help increase productivity, improve quality, work hard – and provide solutions for your application needs.

Baldor AC Servo Drives

MicroFlex™ e100

MicroFlex™ e100 integrates the advanced capabilities of real-time ETHERNET Powerlink to provide superior performance, network integration and costs savings. MicroFlex e100 is compatible with the NextMove e100 motion controller to provide a fully integrated solution using real-time Ethernet. MicroFlex e100 is a compact servo drive, available in single phase from 110-230VAC or 3 phase 230VAC operation in current ratings of 3, 6 and 9A. It provides high performance servo control for both rotary and linear brushless motors with its powerful DSP (Digital Signal Processor) core.

MicroFlex

Baldor's MicroFlex is a compact brushless servo control capable of powering either rotary or linear motors. Input command may be the industry standard +/- 10 Vdc (velocity or torque), or pulse and direction (solutions for stepper upgrade packages). Feedback is software programmable, accepting encoder, SSI (Synchronous Serial Interface) or Halls sensors. Available in single phase from 110-230VAC or 3 phase 230VAC operation in current ratings of 3, 6 and 9 amps. Intuitive front end Windows software provides full auto-tuning capabilities.

Flex Drive II

Baldor's FlexDrive II is a fully featured 1 axis brushless servo which provides high performance control of rotary and linear brushless servo motors. FlexDrive II accepts industry standard +/- 10 Vdc, or pulse and direction, or electronic hand wheel command inputs. Baldor's fully featured controls include a variety of options, such as bus options (CAN, DeviceNet, and Profibus-DP), feedback (resolver, incremental and absolute multi-turn encoders), I/O (programmable interface to external PLC) and logic supply options (internal or externally supplied +24 V). Full auto-tuning makes set up and tuning simple . Models available with 115/230/400/460 Vac and currents up to 15/15/27/27 amps.

Flex+ Drive II

Repeatable moves become a breeze to accomplish with this easy-to-set-up package. Baldor's Flex+DriveII is similar to the FlexDrive series, however incorporating intelligence for indexing applications. For simple point-to-point indexing moves, a pre-set table is configured. The 16 pre-set moves can be expanded to 256. Complex indexing is handled with single-tasking version of Baldor's MintMT programming language. Windows front end for easy to use set-up and full auto-tuning . The Flex+Drive II provides servo control for rotary and linear brushless servo motors.

MintDrive II

Baldor's award winning MintDrive II integrates a powerful motion controller and servo drive into an intelligent compact package. The MintDrive II provides motion control for single-axis applications for rotary or linear brushless servo motors. Programmable in Baldor's easy to use multi-tasking language MintMT, which coordinates motion, HMI and PLC tasks. Supports positional moves, CAMS, flying shears, software gearboxes, and more. Engineered for much higher speed. Windows front end provides full auto-tuning to make velocity and position loop set-up simple.

H2 Servo

Baldor's new line of H2 Servo Drives provides control of 3-phase AC induction servomotor in an industrial package and design. These NEMA 1 controls offer Baldor’s easy to use Smart Keypad for easy setup and flexibility. The H2 keypad follows the same easy to use menu structure as that of its companions, the H2 Inverter and H2 Vector drives.

Series 23H

Baldor's H-series incorporates an easy to use keypad for setup, auto-tuning and operation. The keypad's 32 character alphanumeric display provides full parameter names to simplify setup and operation, 12 keys provide tactile fee. Includes auto-tuning. Models with 15 point-to-point pre-set positioning available. Optional field installable expansion boards extend capability to suit application needs Models include internal power supply and are available for 230/400/460 VAC, with up to 54/27/27 amps continuous.

EuroFlex (TM)

EuroFlex (TM) is a compact EuroCard format servo drive, available in single phase from 24-80VDC or 18-56VAC, 5A continuous, 15A peak. EuroFlex provides high performance servo control for both rotary and linear brushless motors with its powerful DSP (Digital Signal Processor) core. The motor feedback is software programmable, accepting commutating encoder or Halls only.

Baldor DC Brushless Adjustable Speed

Baldor's BMC-series of controls now provides designers the advantages and benefits of brushless technology for adjustable speed applications– these include quieter operation, less maintenance, tight speed regulation and a more efficient design. Adjustable speed applications such as door openers, mixers, conveyors, pumps, and many others can now make efficient use of brushless technology

Baldor DC Servo Drives

TSD Series

Baldor's TSD is a totally enclosed PWM drive for control of one or two DC servo motors. Panel mount enclosure, completely stand-alone unit plugs into 115 or 220 Vac. Accepts industry standard +/- 10 Vdc input command for operation in either velocity or current mode. Provides up to 5 amps continuous, 10 amps peak per axis. Fully protected unit. Easily interfaces to existing motion controllers.

UM Series

The UM control is an open chassis configuration designed to operate a wide range of Baldor's DC servo motors. The UM series typically contains from one to six servo control cards mounted onto a multi-axes chassis containing a power supply. Accepts industry standard +/- 10 Vdc input command for operation in either velocity or current mode. Models provide up to 6/15 amps continuous, with 15/30 amps peak. Easily interfaces to motion controllers. Protection for over/under voltage, over temperature, short circuit, etc.

LD Series

The LD series servo control is an open chassis configuration similar to the UM, however operates direct from 115 Vac. The LD contains one or two servo control cards mounted onto a chassis, provide 15 amps continuous, 30 amps peak per axis. Protection for over/under voltage, over temperature, short circuit, etc.

Baldor Grinders / Buffers

Grinders

Baldor's industrial quality, single and three phase, bench and pedestal grinders are available having wheel diameters of from 6 to 14 inches. This well known line also includes diamond wheel and carbide tool grinders and abrasive belt grinders. Some designs of the abrasive belt grinders are supplied with a three position tiltable belt. All these grinder products are backed by a three-year warranty.

Buffers

Our industrial buffers range in size of 1/4 horsepower to a husky 7 1/2 horsepower. These buffers are designed for use with soft cloth wheels. Single-phase buffers are designed for 60 Hz operation, while all three-phase buffers are suitable for either 50 Hz or 60 Hz. All buffers are backed by Baldor's three-year warranty.

Polishing Lathes

Baldor's polishing lathes have features preferred by dentists, dental lab technicians, jewelers, lapidary, and others requiring precise trouble free polishing. The tapered shafts accommodate chucks with standard dental taper. One side of Lathe #380WCT is equipped with the Wells “Super Quick” chuck. The ball bearings in all lathes are lubricated for life and sealed to prevent entry of dust and debris. All polishing lathes have a three-year warranty.

Baldor Generators

Baldor Generators now offers the most complete line of portable, standby, prime power and peak-shaving generators in the industry. From 1.3 – 2,000 kW in gasoline, LP, natural gas or diesel, there’s a Baldor generator for every power requirement. Each generator is designed and manufactured for maximum performance and reliability, making Baldor generators “the power solution” for industrial applications.

Industrial Portable Generators

Baldor industrial portable generators are suitable for applications where portable power is needed. Available from 1100 through 11,000 watts these generators are designed for continuous operations. Portable generators are available in several models: the fully featured Premier line; maximum valued Powerchief line; and diesel. Baldor portables provide a "Switchless Full Pow'R" feature, which eliminates the voltage selector 'power switch'. The Premier models also have an automatic idler feature, which reduces fuel consumption, and have a unique 'Focal Vibration System', which reduces vibration and eliminates 'floor walking'.

Industrial Towable Standby Generators

Baldor towable generators are designed and engineered for industrial, commercial and rental applications that require quiet operation, optimum performance and superior reliability. From the ultra quiet sound attenuated enclosures to the state-of-the-art electronics and controls, these units are engineered to meet the most rugged conditions. Place the unit at the job site, connect the load and start it up. Units can also be used with an automatic transfer switch for standby applications. Available from 25kVA/20kW to 400kVA/320kW these units have a three position voltage selection switch for 1 and 3 phase connections; large integral fuel tank; fuel water separators and many safety features including water temperature shutdown, and low oil shutdown. Field installed or Mod Express options are available including battery chargers, block heaters, and ball hitch couplings.

Mobile Light Towers

Baldor's compact mobile light tower provides 4000 watts of light anywhere you need it: Construction, Emergency, Industrial, Mining, Civil Engineering and Event Lighting. With metal-halide lamps the Baldor POW’R LITE models will provide light coverage for over 7 acres. Each model is powered by a Baldor 6000 watt light tower generator, which is designed for a compact and efficient installation. POW’R LITE light towers are powered by the dependable Kubota diesel engine. A 50-gallon fuel tank provides for 100-hours of operation.

Automatic Emergency Standby Generators

The Automatic Emergency generators have been engineered and built to meet the emergency power needs of the residential and light commercial customer. Available from 8-25 kW ratings, these units continuously monitor the electrical current in your home or office and start up automatically if the utility power is interrupted. And they shut themselves off when utility service is returned. Natural gas and LP powered units are available. Other features include: powder coat paint finish, weatherproof enclosure constructed of heavy gauge steel and has special sound attenuation.

Industrial Agricultural Standby Generators

Industrial diesel engine-driven generator systems for industrial single phase applications including agricultural confinement house operations, greenhouse facilities and dairy operations. Used also as power systems for municipal plants. Available in sizes 30kW to 200kW with John Deere engines. Other features include full-status monitor, fuel connections for use with existing tanks or provisions for optional sub-base tank. Available options include weatherproof enclosures, circuit breakers, and starting battery/charger.

Gaseous Standby Generators

Baldor GLC generator sets provide totally automatic standby power for large residences and small businesses. Available from 30 to 125 kW they are fueled by LP or natural gas. Reliable industrial gaseous engines give a long service life on the GLC units. The automatic voltage regulator provides precise voltage control, while the electronic isochronous governor assures precise frequency control. A digital controller features full instrumentation of engine and output power conditions. All GLC generators are prototype engineered, factory built and production tested. Field installed or Mod Express options are available including battery chargers, exhaust silencers, and enclosures. When used with the optional weatherproof or sound attenuated enclosure the unit provides a smooth and quiet operation.

Industrial Diesel Liquid Cooled Generators

Whether it's providing primary power for a transcontinental ship, a remote copper mine, or supplying vital standby power for a large metropolitan computer center, Baldor IDLC generators are at work all over the globe. For peak shaving duty, IDLC generators can supply prime power in parallel with the utility. In the standby mode, the IDLC gensets can supply emergency power to all critical loads and selected loads as desired. Every IDLC power system is designed, engineered, built and tested to the customer's specific specifications. Baldor's IDLC diesel generator sets include ratings from 30kW to 2000kW using John Deere, Mitsubishi, or Detroit diesel engines. Solid-state engine controls and switchgear systems are designed to meet your application requirements.

Industrial Gaseous Standby / Prime Power Generators

The Baldor IGLC generators are a custom product configured to customer’s specifications and offered from 30kW to 880kW in Natural Gas or LP. IGLC power generation systems are available in open configuration, weatherproof and fully sound attenuated enclosures. Every IGLC power system is designed, engineered, built and tested to the customer's specific specifications. Solid-state engine controls and switchgear systems are designed to meet application requirements.

Generator Mod Express (TM)

Now you can buy a Baldor GLC (Gaseous Liquid Cooled) or a Baldor Towable genset and have several more choices and faster delivery. The modular nature of the generator Mod Express™ System means you can more or less design your own genset, with the type of enclosure and features you want, and there is considerable field upgrade potential